Item Number: WLPLG-713 or WLPL5-713

General

Wet Look Paver Sealer is the ideal one-step, easy to apply, product for sealing interlocking concrete pavers and stabilizing joint sand by locking it into place. This state of the art formula offers exceptional, high gloss wet look protection with stain resistance (even against oil and grease), resists color fading, efflorescence, weeds and mildew growth on the surface.

Product Coverage

100-250 sq ft/gal depending on porosity of surface and method of application. Second coat will go 50% further. 

Product Application

Use garden-type, solvent resistant sprayer, low pressure airless sprayer, or natural bristle brush and non-foam squeegee for application.

Rollers are not recommended when applying the Wet Look Paver Sealer. Apply one coat in liberal, saturating manner so that joints are saturated with Paver Sealer. Ensure that all joints are flooded to maximize sealer soaking into the dry sand. Squeegee any excess product to avoid puddling on the surface. Allow additional drying time in moist, cool climates. An optional second coat may be applied after two hours if desired to increase protection and gloss. For added slip resistance, Glaze ‘N Seal Grip ‘N Seal slip resistance additive may be added to the second coat of sealer.

Item #WLPLG-713