logo

0 cart

Glaze N Seal Natural Look Penetrating Sealer

Glaze N Seal

$ 14.41

$ 40.07

$ 211.75

Select a Size (Volume)

Select a count

In cart

people who bought this item also bought


Item Number: NSG-713

General

Offers long lasting, economical "Natural Look" stain protection against water based stains for all Mexican tile, brick, flagstone, concrete, artificial stone, slate, stucco, quarry tile or clay tile, natural stone, unglazed tile, and grout. May also be used as grout release. This sealer reacts with carbon dioxide and atmospheric moisture to form a penetrating water repellent barrier within 24 hrs. The extreme low moisture absorption provided by this sealer shows little change for up to 10 yrs. Features: Non-flammable; invisible protection; water repellent; long lasting; water clean up; repels dirt and waterborne stains. Special Features: Reduces efflorescence problems; environmentally safe; mildew resistant; waterproofs shower grout and glass block grout.


Product coverage

100-700 sq ft/gal depending on the porosity of the surface.


Product application

An invisible waterbase sealer formulated to impart water repellence and dirt reduction to concrete, tile and masonry surfaces with no change in surface appearance. May be used as a presealer or grout release on tile and masonry surfaces. Allow 24 hrs to dry and cure. Solvent (thinner): Water Caution: Do Not allow excess sealer to dry on surface or a white residue may occur. Glass, aluminum, glazed tile and other surfaces should be protected from sealer contact. The alkalinity of this sealer will damage lawns and shrubs; protect with a drop cloth. Always test for suitability prior to total application. Always read product label carefully before using!

Item #NSG-713